Heat Shrink,Heat Shrink End Caps,Heat Shrink Tubes,Heat Shrink Tubes Manufacturers,Cable Joints & Terminations,Power cable accessories,power cable accessories manufacturer,Heat Shrinkable Products,Heat Shrink Tubings,Heat Shrink Tubings Manufacturers,Heat Shrinkable tubes,heat shrinkable tubes manufacturers,Busbar insulation tubes,Plastic caps,Pvc caps,Dip moulded components,Heat Shrink Sleeves,IP 68 Protection Boot,Outdoor Termination,Pvc Boot,Anode Cap,Corrosion Protection Tube,MV Cable Joints,Cable Splice,Vinyl Cap,Support Isulator,End Seals,Printable Sleeves,Heat Shrink Tape,Protection Shroud,Protection Cover,Bustube,Busboot,Insulcap,Insultube,Finotube,Cablink,Thin Wall Tubes, 36 kV Cable Joints & TerminationsBus Bar End Caps, 1.1 KV Cable Joints & Terminations, Bus Bar Connection Shrouds, De Gassing End Cap,Busbar insulation tubes, Busbar insulation shrouds, Switchgear insulation products, Busbar Boots,Gala Thermo Shrink

GLC/YG : Yellow/Green Striped Thin Wall Tubing -
FINOTUBE-Yellow/Green

This is Yellow / Green striped thin wall tubes, manufactured using a special co-extrusion process ensuring that the Yellow & Green color is fully integrated into the tubing wall.

APPLICATIONS :
GLC/YG range of tubing is extremely flexible, flame-retardant, thin wall with yellow and green striped heat shrink polyolefin tubing especially for electrical equipment ground lead applications. The unique dual color striping of yellow and green provides an instant identification for ground wires.

GENERAL PROPERTIES OF PRODUCT :

Shrink ratio 2:1 & 3:1
Flame retardant and self-extinguishing
It offers a low shrink temperature of 90o C, so it shrinks rapidly and minimizes heat exposure and possible damage to temperature sensitive substrates.
For Electrical Insulation up to 600 volts
Excellent chemical and thermal resistance
UV stabilized
Meet ROHS Compliance


	SELECTION CHART
	All dimensions are in mm

Part	Internal Diameter (mm)		Recovered Wall	Packing Configurations
Number / Size	Supplied	Recovered	Thickness (mm)	Spools Meters/Spool	Cut Lengths 1.2 meter/box
GLC/YG 2.5/1.2	2.5 mm	1.2 mm	0.44 mm	200 m	600
GLC/YG 3.0/1.5	3.0 mm	1.5 mm	0.44 mm	200 m	500
GLC/YG 3.5/1.7	3.5 mm	1.7 mm	0.44 mm	200 m	500
GLC/YG 4.0/2.0	4.0 mm	2.0 mm	0.44 mm	200 m	250
GLC/YG 5.0/2.5	5.0 mm	2.5 mm	0.56 mm	150 m	250
GLC/YG 6.0/3.0	6.0 mm	3.0 mm	0.56 mm	150 m	200
GLC/YG 7.0/3.5	7.0 mm	3.5 mm	0.56 mm	150 m	200
GLC/YG 8.0/4.0	8.0 mm	4.0 mm	0.56mm	150 m	175
GLC/YG 9.0/4.5	9.0 mm	4.5 mm	0.56mm	150 m	150
GLC/YG 10.0/5.0	10.0 mm	5.0 mm	0.56mm	100 m	150
GLC/YG 12.0/6.0	12.0 mm	6.0 mm	0.56mm	100 m	120
GLC/YG 12.7/6.35	12.7 mm	6.35 mm	0.56mm	100 m	120
GLC/YG 14.0/7.0	14.0 mm	7.0 mm	0.69 mm	100 m	100
GLC/YG 16.0/8.0	16.0 mm	8.0 mm	0.69 mm	100 m	100
GLC/YG 18.0/9.0	18.0 mm	9.0 mm	0.69mm	50m	80
GLC/YG 20.0/10.0	20.0 mm	10.0 mm	0.69 mm	50m	65
GLC/YG 22.0/11.0	22.0 mm	11.0 mm	0.69 mm	50m	60
GLC/YG 25.0/12.5	25.0 mm	12.5 mm	0.78mm	50m	40
GLC/YG 30.0/15.0	30.0 mm	15.0 mm	0.87mm	50m	30
GLC/YG 40.0/20.0	40.0 mm	20.0 mm	0.97 mm	50m	20
GLC/YG 50.0/25.0	50.0 mm	25.0 mm	0.97 mm	50m	15
GLC/YG 76.0/38.0	76.0 mm	38.0 mm	1.17mm	25m	10
GLC/YG 100/50.0	100.0 mm	50.0 mm	1.17mm	25m	5

TECHNICAL DATA

PROPERTIES	TEST METHOD	TYPICAL VALUE
Physical
Tensile Strength	ASTM-D-638	14 N/mm2 (Min.)
Elongation	ASTM-D-638	300 % (Min.)
Water Absorption	ASTM-D-570	0.15% (Max.)
Specific Gravity	ASTM-D-792	1.1
Longitudinal Change	ASTM-D-638	-10% (Max.)
Thermal
Operating Temperature	IEC216	-55^oC to + 125^oC
Heat Shock	250^oC for 4 hrs	No dripping, Cracking or flowing
Chemical
Fungus Resistance	MIL-1-7444	Inert
Copper Corrosion	ASTM-D-2671-B	Good
Chemical Resistance	ASTM-D-2671	Good
Electrical
Dielectric Strength	ASTM-D-2671	>20kv/mm
Dielectric Constant	ASTM-D-150	3.0 (Max.)
Volume Resistance	ASTM-D-257	10¹⁴Ohm cm (Min.)